Becoming a distributor
or Factory visit click
here>>
EESIFLO
PORTALOK 7S Ultrasonic Flowmeter
ULTRASONIC FLOW METERS MULTIFUNCTION
FULLY WEATHERPROOF CLAMP ON FLOW METER FOR CLEAN AND DIRTY
LIQUIDS
The P7s ultrasonic flow meter measures the velocity of any liquid through most pipes using ultrasonic transducers. The flow measurement remains accurate even if temperature change is experienced. The meter can be used on water based applications and also other chemicals by entering in the density and kinematic viscosity of the flowing medium for the automatic flow profile volume correction. Maintenance of the ultrasonic flow meter is negligible because there are no moving parts. The ultrasonic flow meter uses a contapropagating transit time flow measurement technique and is able to function in clean and dirty media.
Many years of development and client feedback have enabled the design to be not only user friendly but easy to install and operate. Since the ultrasonic flow meter might be used outdoors and frequently transported, we have built it in such a way that the operator does not need to worry about comprimised flow measurement due to wet cables, connectors and electronics, which can be a problem with poorly designed portable flow meters. Everything you need to do a flow measurement and log or graph the results is provided with the flow meter kit .
EESIFLO supports its worldwide ultrasonic flow meter clients by unique products, fast delivery and customer support.
Advantage
Weatherproof Flowmeter and sensors
Dual Mode Transit Time and Doppler
Very user friendly
No cutting of pipes
No shutting down of process
Affordable
Lightweight and easily transportable
Quick response
Integral data logging
Features
Fully weatherproof IP 68
rated Flow Computer, connectors and sensors.
60,000 point built in datalogger, analog
output, backlit LCD displaying flow and
total ,RS 232 and 5 M cable as standard
Extremely easy to install
clamp-on sensors with no process interruption.
Advanced signal transmission Non-invasive
flow measurement of liquids, no pipeline
disturbance, no pressure loss.
Suitable for all commonly
used pipe materials and all sonically conductive
liquids
Measurements in imperial
or metric units
With improved signal transmission
the standard sensors cover a wider range
from 1/2 inch to 98 inches.
This portable
device has been designed to meet the practical short
and long term needs of the Service/Maintenance and Commissioning
Engineer wishing to check the flow rate of liquids at
different locations in a distribution or a process.
The Portalok is sent to you as a complete system ready
to measure any liquid in any pipe.
Many clients worry about using an instrument that
can easily be damaged by harsh environments , the
battery running out or simply that the instrument
will not work. EESIFLO have produced the Portalok
7S with this in mind and have weather protected sensors,
cable and transmitter.
The setup of the unit is simple and user friendly
and can obtain the required flow information in minutes.
Everything required for a flow measurement is shipped
with the Portalok 7S Flow kit.