The EESIFLO EASZ-12 Doppler Flow Switch continuously measures the velocity of fluid in pipelines using the non -intrusive Doppler principle. The switch is quick and easy to install with no holes in the pipe, no sensor fouling, no maintenance and no downtime for sensor installation.

The EASZ-12 is designed for use with fluids, which contain in excess of 0.1% suspended solids or bubbles, having a size greater than 100 microns. Typical applications include slurries, sewage, sludge, pulp, food products, aerated water and abrasives. This versatile flow switch is suitable for use on a variety of metal and plastic pipes.

The EASZ-12 includes a relay with adjustable high and low setpoint control and adjustable delay-on and delay -off timers. The EASZ-12 has two selectable flow ranges, 0 - 6.5 f/s and 0 - 19.6 f/s, with the flow rate indicated on the 10 LED bar graph flow indicator.

Measuring Range 0 to 6.5 f/s (1) 0 to 19.6 f/s (2) Set Points 0 to 100% of Range Timer Delays 0 to 60 seconds Output 1 Relay - 1Amp SPDT Transducer Cable 10ft length Temperature Sensr -4 to 194 °F Electronics Enclosure Electronics 14 to 122 °F IP65 Polycarbonate 4.7 x 4.7 x 2.2 in		Power Input 115/230V ac, 50Hz/60Hz 24V dc +/-10% Transducer IP68 St/Steel 3.1 x 0.9 x 0.8 in Indication LED's 10 LED bar graph Range selection Hi and Lo Alarm Signal Strength Failsafe Mode Selectable Weight 1.87lb