Low Flow rate Flowmeter

Pure water – Ultrapure water in plants
Chemical Feeds
Highly corrosive chemicals
Low flow measurement of liquids

The EESIFLO CTT Series SP-1 is a flowmeter is designed for low flow rates and small line applications. The flowmeter consists of a flow measurement block with an inlet and outlet . Each block has two high precision non contact ultrasonic transducers coupled to the ends. This means that all the wetted parts are the same as the material of construction. There is absolutely no sensor contact with the process fluid. All measurements are non mechanical and do not have any moving parts. The SP-1 series uses PVDF as its material of construction.

The flow meter is an ideal choice for use in industries where extreme cleanliness and anti-corrosiveness is required. Accuracy over a wide flow ranges is maintained by the linear output of the concurrent transit time technique.

Flow Sensor Block :
Liquid Temperatures :
Maximum Fluid Pressure :
Process Connection :
Flow signal Cable length :
Enclosure :
Degree of protection :
Operating temperature :
Housing material :
Display :
Power Requirements :
Outputs :

Designed for water, water based liquids/chemicals
10 °C to 60 °C
10 Bar
½ inch NPT Female (fittings supplied as option)
3m
H 140 x W 190 x D 70 mm
IP 66 according EN 60529
-10 ... 60 °C (14 ... 140 °F)
Aluminium, powder coated
2 x 16 digit LCD, dot matrix, backlit
12 -24 VDC
4-20mA (passive) corresponding to measurement range ordered.

Transmitter
Low Flow rate Flowmeter

Flow Sensor PVDF Version 109mm x 60mm x 32mm