|
|
Picture 1 shows the display in the
normal run mode. The display shows the Flow Rate, which can
be in various engineering units, and the Total Flow.
|
|
|
Picture 2 shows the prompt for the
security code. The user must enter this code correctly before
any further changes can be made.
|
|
|
Picture 3 shows the selection of
a flow curve. This selection could be a Venturi or Parshall
Flume, V-Notch Weir or the 21 Point Lineariser for Customer
Specific Flumes.
|
|
|
Picture 4 shows the selection of
Flow units. This selection includes Lt, m3, Gal and Qty. There
are also various time periods that can be selected e.g. seconds,
minutes, hours and davs.
|
|
|
Picture 5 shows an example of the
diagnostic feature being displayed. By pressing ENTER while
in running mode the user can View the Head Height as well
as the Gain & Power levels of the instrument.
|
