Step 25 Choose a Damping Time. If you don’t know what this is, just leave it at 20

Step 26 The meter will ask you if you want to store data. In this case we are not. It will also ask if you want a serial output – again we are not using them in this example

Step 26 (Continue)

Step 27 Scroll back to Measuring. You should remove the thickness gage if you are not using it anymore.

Step 28 You should choose channel A. Channel A is active when you See the square root sign under it.

Step 29 Choose a Sound Path . In this case it is Sound path 2. The Transducers Should be on the same side of the pipe with arrows on the transducers pointing in the direction of the flow. You can find out more about other sound paths by referring to the user manual

---