The EASZ-1 can be used to check oil or fuel product quality or as an on-line moisture monitoring and control instrument allowing separators and oil purifiers to be started only when needed or as a diagnostic or preventative device protecting critical systems from premature failure. The EASZ-1 water in oil unit responds very quickly to a change dielectric of the oil being monitored and is not affected or knocked out of service by saturation or limited by the saturation point of the liquid since it will continue to work in both high and low measurement ranges.

The industry standard practice has been to report water content as a percentage of the total volume or in parts per million (ppm) The EASZ-1 can directly measure the ppm or percentage water in oil in a process. This has enormous advantages for clients wishing to correlate actual moisture readings with laboratory results. The fact is, the EASZ-1 is more reliable than spot sampling or laboratory results , simply because it is monitoring the total volume of oil 24 hours a day. The adavantages of the EASZ-1 is that it can be calibrated to any type of oil and work reliably without the need for replacement due to sensor element wear. The problem of drifting has been eliminated by the use of modern technology digital circuits .

The EASZ-1 is normally a quick ship item and can be retrofitted into existing oil systems either as a bypass instrument or in full bore inline versions. Contact you local EESIFLO representative with your application so that the most suitable version can be selected to work in the oil process being monitored.