EESIFLO International produces bs&w monitors designed to provide the highest possible sensitivity, resolution, and accuracy for water con
tent determination in crude oil, other hydrocarbons, or other
low dielectric liquids from a max of 100% to levels below 1000
parts per million (ppm). In oil and natural gas (condensate)
production, water cut and S&W measurements are signifi
cantly improved with the EASZ-1 technology.
Enhanced
digital signal processing and full product temperature compensation are two of the technological advancements utilized by
this device. Probe sizes from 1” through 42 ” and a. 4-
20 outputs are available for remote readout.
Water cut, process temperature and dielectric values are measured accurately and can be reported back to a control centre.
Product Temperature Compensation
The base dielectric constant (Dk) of oils can change with changes in temperature. This can cause traditional monitors to change without a variance in water content. For example; for a 10°F change, a typical crude oil may show a reading shift of as much as 0.1%, which normally would be considered as water. The EASZ-1 measures product temperature and calculates a corrected cut reading, providing a true water or S&W cut at any temperature
Reliable Watercut BS&W Meter
|
