The EASZ-1 is the fastest response sensor available and the best choice for continual ppm monitoring

The lubrication system of a paper machine typically consists of an oil tank, circulation pump and separator or purifier. The separator is only able to remove water that is in free form. In addition to the separator or purifier, there is also an air dryer in the reservoir tank to remove humidity from the air in the tanks.

In modern paper machines, there are usually two separate lubrication systems, one in the wet end and one in the dry end. It is not unusual that the client has to remove large amounts of water from the system every week.

EESIFLO’s fast reponse water in oil monitor is a unique product in its ability to measure very wide ranges of water in oil immediately . Moisture or water ranges can be configured by simply changing jumpers on its PCB card. A very common setting is 0-1000ppm or 0-10,000ppm. The unit normally requires a one time calibration which is based on high accurate laboratory methods to ASTM standards.